Lancetta company in Russia Woodex Exhibition
Lancetta company in Vietnam Exhibition
Lancetta company in Ligna Hannover Exhibition
Diamond saw blades have high hardness and high strength, and their manufacturing cost is also very high.
Whether the thickness of the carbide saw blade should be thin or thick, due to comprehensive factors, thin material saving, high cutting quality, but unstable, thick saw cutting is more stable and cutting is more durable.
The feed speed of the metal circular saw blade is what we often say the running speed, which can affect the output of the company's sawing, so we also need to know the feed speed of the metal circular saw blade clearly. There are two calculation methods below For reference.
PCD is a polycrystalline material synthesized by sintering diamond fine powder through cobalt and other metal binders under high temperature and high pressure conditions, also known as sintered diamond.
it must use less teeth If it is a plywood type, you must use more teeth to reduce the edge collapse.
The saw blade of the circular saw machine has sprung teeth or excessive wear. It often happens in many companies that use metal circular saw machines. This is a common problem and it is also a headache for companies. After all, the consumption of saw blades is also a big expense for enterprises. . So is there any way to minimize this loss?
Continue to use. Out-of-roundness means that there is more wear on one side of the blade and less wear on one side of the blade. You can see the difference in the level of wear of the blade from the appearance.
In the daily process of using the saw blade base, you will encounter many small problems. For example, what should be done when the saw blade base slows down at startup,
Serration tooth shape and angle are determined according to factors such as processing object, sawing direction, sawing parameters and equipment structure.
Altogether 33 article， Every page shows：12 article