Home > > Industry News
  • Several maintenance methods of diamond saw blade

    2020-06-18 11:40:24
    Diamond saw blades have high hardness and high strength, and their manufacturing cost is also very high.
  • Saw blade thickness selection considerations

    2020-06-18 11:36:37
    Whether the thickness of the carbide saw blade should be thin or thick, due to comprehensive factors, thin material saving, high cutting quality, but unstable, thick saw cutting is more stable and cutting is more durable.
  • How to calculate the operating speed of diamond saw blade

    2020-06-18 11:34:43
    The feed speed of the metal circular saw blade is what we often say the running speed, which can affect the output of the company's sawing, so we also need to know the feed speed of the metal circular saw blade clearly. There are two calculation methods below For reference.
  • Advantages of pcd tools

    2020-06-18 11:30:21
    PCD is a polycrystalline material synthesized by sintering diamond fine powder through cobalt and other metal binders under high temperature and high pressure conditions, also known as sintered diamond.
  • What is the difference between the number of teeth of cemented carbide woodworking saw blades?

    2020-06-18 11:18:41
    it must use less teeth If it is a plywood type, you must use more teeth to reduce the edge collapse.
  • Factors of blade break of woodworking circular saw

    2020-06-18 11:12:44
    The saw blade of the circular saw machine has sprung teeth or excessive wear. It often happens in many companies that use metal circular saw machines. This is a common problem and it is also a headache for companies. After all, the consumption of saw blades is also a big expense for enterprises. . So is there any way to minimize this loss?
  • Matters needing attention in the use of small diameter saw blades

    2020-06-18 11:01:51
    Continue to use. Out-of-roundness means that there is more wear on one side of the blade and less wear on one side of the blade. You can see the difference in the level of wear of the blade from the appearance.
  • What to do if the saw blade slows down

    2020-06-18 10:54:36
    In the daily process of using the saw blade base, you will encounter many small problems. For example, what should be done when the saw blade base slows down at startup,
  • Correct use method of alloy saw blade

    2020-06-18 10:43:50
    Serration tooth shape and angle are determined according to factors such as processing object, sawing direction, sawing parameters and equipment structure.
  • Selection of carbide saw blades

    2020-06-18 10:26:45
  • What is carbide saw blade

    2020-06-18 10:22:17
    Carbide circular saw blade is a kind of high-efficiency cutting tool for deep processing.
  • How to maximize the performance of its diamond saw blade

    2020-06-18 09:50:18
    As the saying goes: "Cheap is not good, but good is not cheap". It may be true for other commodities, but I am afraid it is not all for knives and tools.
Altogether 24 article, Every page shows:12 article