Maintenance method of diamond saw blade:
1. If the diamond saw blade is not used immediately, it should be folded down from the saw table, coated with anti-rust oil, and then laid flat or suspended using the inner hole. The flat diamond saw blade should not be stacked with other objects or feet. And pay attention to moisture, rust.
2. When the diamond saw blade is no longer sharp and the cutting surface is rough, it must be removed from the saw table and sent to the diamond saw blade manufacturer for re-grinding (Kyushu creative blade can be re-grinded 2 to 8 times, the most Long service life up to more than 4000 hours). Diamond saw blades are high-speed cutting tools, and their requirements for dynamic balance are quite high. Please do not give diamond saw blades to non-professional manufacturers for grinding. The grinding cannot change the original angle and destroy the dynamic balance.
3. The inner diameter correction of diamond saw blade, positioning hole processing, etc., must be handed over to the original manufacturer. If the processing is bad, it will seriously affect the service life and use effect of the diamond saw blade, and may lead to the risk of personal and property damage. In principle, the hole expansion should not exceed the original diameter of 20mm, so as not to affect the balance of stress.
Diamond saw blades have high hardness and high strength, and their manufacturing cost is also very high. The main reason is that the diamond blades are expensive. Second, the material requirements of the saw blade base are high (high-end diamond saw blade bases are generally selected from alloys imported from Germany Tool steel), and therefore its high manufacturing costs have led to high prices for diamond saw blades. However, because of the sharp and durable characteristics of diamond saw blades, and as diamond saw blade manufacturing technology becomes more and more mature, it is more and more recognized and accepted by consumers. There are also more and more consumers using diamond saw blades. Then, the workers of many enterprises only know to use diamond saw blades and do not pay attention to the maintenance of diamond saw blades. Some even know nothing about the maintenance methods of diamond saw blades. As a result, the service life of the diamond saw blade is greatly reduced, and its sharp and durable cost performance cannot be exerted.
Copyright By © Tangshan Lancetta Machinery Manufacturing Co., Ltd.